#1 The Original protocol

The Lash Prep
- Use the Detoxcil Shampoo and a Novobrush (with the Novotip tip) to thoroughly clean the lashes.
- Apply the Sticky Patch (or Novopatch) to protect the lower lashes.
*NVQ Tip: Don’t forget to take a photo at each step of your service!

Lash Lift
- Place the shield on the upper eyelid, as close as possible to the lash roots.
- Use Sticky Adhesive and the Flat Brush 2.0 to adhere and separate the lashes on the shield.
- Using the application brush, apply the the Perm lotion to 1/3 to 1/2 of the lashes starting from the base, without touching the tips.
- Use tweezers to check the flexibility of the lashes.
- Remove the Perm Lotion Using Removal Brush
*For STRONG Perm: Use a dry Removal Brush.
*For SAFE Perm: Use a damp Removal Brush.
Average action time: | STRONG Perm | SAFE Perm |
Fine, soft, or dry lashes | 5 minutes | 9 minutes |
Normal lashes | 6 minutes | 11 minutes |
thick, stiff, or oily lashes | 7-8 minutes | 12-13 minutes |
*Add more time if needed
*NVQ Tip: Add a tiny drop of Perm Protect to better protect lash health.

The FIX + Tint
- Mix equal parts FIX lotion and Refectocil tint (ratio 1:1)
- Apply tint mix from the base of the lashes to the tips and let it sit for 10 minutes..
- Use the Removal Brush to gently remove the tint.
- Use a Novobrush (with Novotip) to carefully detach the lashes.
*NVQ Tip: You can find more details about the Fix + Tint step here

Clean + Treat
- Use Detoxcil and a Novobrush (with the Novotip attachment) to thoroughly clean the lashes.
- Rinse with distilled water using the rinsing bottle
- Apply Hydracil serum using a Novobrush (with Novotip) to avoid cross-contamination
- Use a Novobrush to brush the lashes. ( mascara tip )
*NVQ Tip: For better photos, apply Nutrifix and position the lashes using Spiky tweezers.
#2 The glueless protocol

The Lash Preparation
- Use the Detoxcil Shampoo and a Novobrush (with the Novotip tip).
- Apply the sticky patch (or Novopatch) to thoroughly clean the lashes.
*NVQ Tip: Don't forget to take a photo at each step of your service!

The Lash Lift
- Mix the Glueless Powder and SAFE Perm lotion using a ratio of 1:10 (Powder:SAFE Perm)
- Spread the mixture onto the Moon Shield (2-3 mm width)
- Place the Moon Shield under the upper lashes as close as possible to the lash base without touching the skin.
- Using a brush, gently push the lashes into the lotion on the Moon Shield.
- Apply lotion over the lashes with, focusing on 1/3 to 1/2 of the lash from the base and avoiding the tips.
- Use tweezers to check the flexibility of the lashes.
- Gently remove the lotion with a Removal Brush.
- Remove the Moon Shield and wipe the lashes with a damp cloth to remove any remaining lotion.
Average action time: | SAFE Perm |
Fine, soft, or dry lashes | 9 minutes |
Normal lashes | 11 minutes |
Thick, stiff, or oily lashes | 12-13 minutes |

The FIX + Tint
- Apply the straight tip shield to the eyelid
- Apply a thin layer of PermRepair Mask to the shield
- Use PermRepair Mask and a Removal Brush to position the lashes onto the shield.
- Allow the lashes to rest for 2–3 minutes, then remove any excess mask using a Novobrush (with Novotip)
- Mix the fix lotion, tint and the glueless powder
- Use a brush to position the lashes on the shield and apply the mixture from base to tip
- Position a compensator and let it sit for 10 minutes
- Remove the compensator
- Wipe away the lotion with a damp cloth, then remove the shield.

Clean + Treat
- Use Detoxcil and a Novobrush (with the Novotip attachment) to thoroughly clean the lashes.
- Use distilled water and a rinsing bottle to gently rinse away the shampoo.
- Apply Hydracil serum using a Novobrush (with Novotip) to avoid cross-contamination
- Use a Novobrush (with the mascara attachment) to brush and shape the lashes. ( mascara tip )
*NVQ Tip: For stunning photos, apply Nutrifix and position the lashes with Spiky tweezers.